connector solutions

news

Bexkom connector company successfully developed U series push-pull self-locking connectors

Some outdoor equipment has higher and higher requirements for volume and use environment. The equipment is required to be small in size and can be used in very harsh outdoor environments. At the same time, it is required to transmit more signals or currents. The requirements of the interface will also become higher and higher. For example, such devices require the connector to be small in size, waterproof and dustproof, can be quickly plugged and unplugged, and have a higher service life. transmit more signals. Sometimes multiple connectors may be used on a device, which requires each connector to be foolproof to prevent mis-insertion.

The newly developed U-series connector from Bexkom was created for this purpose. Before the introduction of the U series, other series of connectors have been facing some problems: such as the product volume is too large, the positioning is not accurate, the socket and the illustration will be displaced under strong screwing, etc., but the U series successfully solved the problem. These problems, especially in some military equipment with small size requirements and particularly harsh environments, the advantages of the U series have been clearly reflected, favored and loved by many users, and widely used.

The U series connector has 3 positioning grooves, which can form up to 6 different positioning angles, which can prevent mis-mating between different connectors. At the same time, the U series connectors have IP68 waterproof and dustproof rating, and the high-quality sealing can make the connectors achieve air-tight protection. The U series is a very high-density connector. For example, a metal circular connector with a size 0 shell (the diameter of the socket opening is about 8.3mm) can be installed with up to 13 signal channels. Pin materials put forward higher requirements to meet their reliability, electrical properties and mechanical properties.

Beginning on August 1, 2022, the U series products of Bexkom have started mass production and have been used in military mobile equipment, broadcasting and communication equipment and other industries. The company has also done cable processing and injection molding for customers.


Post time: Oct-12-2022